Needed to make some Depron ribs for my Jupiter Duck. As mentioned in a previous video even with a brand new blade in my knife my cutting is not that good. I had luck while cutting the wing panels using a Hotwire so decided to try doing the ribs in a similar way. I did make lite ply ribs to guide the Hotwire. The ribs need to be sanded as smooth as possible along the edge where the Hotwire travels. When the wire gets stuck on even a sliver of wood it burns a little notch where ever it stops. I made a triple thick rib for the Duck to use as the midrib (root rib). More on that later. You can easily cut several separate ribs using this technique.